TutuToday

 

  
For a Great Tutu Halloween Costume

Here's how we made our Goth Tutu with three layers of duct tape.

This required two rolls of black and one of purple duct tape.

You can use all one color --- we used purple for demonstration purposes only.

In that case you could use two rolls of your chosen color.

• Sheek, sleek catlike duct tape bodice with tulle skirt.
• Wear with leggings and great duct tape dungeon boots.

Tulle on left ... net on right of mannequin.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Front and back before finishing the top of bodice.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

We wanted to let you decide if you liked the tulle or net better so we did both.

• Select an old t-shirt, because this will go next to your skin.
• You want as much comfort as possible.
• You can use Saran wrap but that is not all that comfortable.

• Pull the t-shirt tight and cut up the back. Cut away the excess.
• It does not matter if there is an overlap.
• You can trim the overlap when you cut the bodice/corset off.

• Begin wrapping horizontially from the bottom to the top.
• Overlap the duct tape by half.

Smooth out bubbles.

• When done with first layer add drinking straws for boning. We took a break, went to Mc Donald's and got some straws!
• Place the straws with a small piece of tape to hold individually.

• The second layer is added vertically.
• We have used purple for contrast.
• You can use the same color.
• Use small strips in the curvey areas.
• Smooth out bubbles.
• You can see the boning, drinking straws. These give the bodice - corset another dimension which we really liked.

• Third layer is your choice: horizontal or vertical. We chose horizontal and black.

• Finish off the top to make more sturdy.

Beginning to attach the tulle skirt. With duct tape, of course.

Gather tulle or net with your hands and tape on to the bottom of the corset.

• After it is attached go back with two or three more layers of duct tape to secure.
• Wear with leggings.
• Goth thigh high boots in duct tape finish off the creation.

[ad#Google Adsense-468 60]

 

 

Needed: One roll of duct tape for two boots (or possibly two -- it will be very close with one roll) and two old shoes!

A couple of platic bags.

Before and After -- Simple Wedge Pumps were used.

Plastic Bag Wrapped around shoe, foot and leg.

Platic Bag loosely taped. There must be some 'give' in taping the Duct Tape Boot. Otherwise you cannot remove the boot.

You can make duct tape boots yourself -- but two is so much better!

 

 We liked the crinkled look.

No need to strive for perfection. The crinkled look makes it interesting.

 

Will be taped and used again!

Cut not on back or on side but between the two.

Tape the edges and fold over.

Grommets added to close in future.

Custom Costumes
Lee Ann Torrans
Ship within three business days via UPS
LTorrans@gmail.com